MiiCoffee DF64 II Single Dosing Coffee Grinder Review UK 2026

Key specifications

Design and Build Quality

With an aluminium body and a 6.8 kg mass, this coffee grinder is designed to sit steadily during single-dosing, and its 25L x 13W x 30H cm footprint fits many UK kitchen and café spaces. The casing feels rigid, and the added weight helps reduce movement while filling and tapping out. Version 2.4 features a redesigned inner chute, with probes wrapping around it rather than sitting inside. The stepless dial and chrome-wrapped indicator make everyday adjustment straightforward, although the metal parts can mark if handled roughly.

Burr Type and Grind Quality

The DF64 II's grind quality begins with its burr choice, and the 64 mm stainless-steel flat burrs establish its baseline performance across brew types. The burrs are custom made, with a design intended to support even particle production for consistent tasting results. The grinder can also be upgraded to SSP burrs, allowing further tuning of flavour profiles later. Strengths centre on a solid burr platform, while performance still depends on the incoming coffee and roast level.

Grind Settings and Consistency

Stepless adjustment on the MiiCoffee supports more precise grind-size setting than fixed-step designs, making espresso dial-in more repeatable once a consistent workflow is in place. In the miicoffee df64 ii single dosing coffee grinder UK, the redesigned dial is wrapped with chrome, and a metal indicator is included to make adjustments easier to repeat. For consistency, the stepless system allows small changes, but it still requires careful counting of dial movement because there are no fixed detents. Dial in can be refined across brew types, then locked into a stable routine by weighing and measuring output.

Hopper and Bean Capacity

Hopper and bean capacity are limited on the coffee grinder. It is designed for single dosing rather than storing a large supply of beans, so users typically measure one portion at a time before each grind. This suits the MiiCoffee workflow by reducing the chance of stale beans during short brew sessions. Instead of relying on a large hopper, beans are loaded into the 58 mm aluminium dosing cup, then ground, then the dosing cup is emptied and reloaded. The machine body size is 25L x 13W x 30H cm.

Noise Level and Speed

Noise and grind speed on the coffee grinder are shaped mainly by how fast it is run and how many beans are fed into the grinder each time, since it is built for single dosing rather than continuous grinding. With MiiCoffee on Amazon UK, beans are typically dosed into the 58 mm aluminium cup, then the grinder is run briefly until the chute empties. The integrated anti-popcorn disc helps keep beans from jumping, which can steady the grind flow and reduce surge sounds. Sharper changes in speed or dose size still make noise feel more noticeable, especially during short pulls for espresso.

Static and Retention

Static build-up and grind retention matter on the MiiCoffee DF64 II because they affect how much grounds end up in the cup or portafilter and they change how consistent each single dose feels. With its plasma generator in the exit chute, static is reduced, which can lower clinging to metal parts. The grinder is marketed as true zero retention under 0.1 gram, and even without a bellows it aims for almost no leftover. He still weighs each dose if he seeks repeatability. The miicoffee df64 ii single dosing coffee grinder pros and cons include low waste, but cleanup still matters.

Learning Curve and Daily Operation

With a stepless adjustment dial and a single-dose workflow, the MiiCoffee's learning curve comes from dialling grind size consistently and building a routine that finishes each dose cleanly. A common starting point is setting a precise dial point for the target brew method, then weighing and dosing once per cycle. Beans are loaded, the grinder is run, and the 58 mm dosing cup is used for distribution. Zero retention supports repeatability, but inconsistent loading or interruptions can still lead to uneven output.

Cleaning and Maintenance

Cleaning and maintenance are straightforward, but they work best with a consistent routine to keep the single-dosing workflow tidy and repeatable. For the miicoffee coffee grinder, each session should begin by emptying the dosing cup, then using the blow-out funnel with lid to clear dead space. After grinding, a soft brush can loosen grounds from the chute and around the anti-popcorn disc, and a dry cloth can wipe the aluminium dosing cup and exterior. For deeper cleaning, brushing the chute area first helps, followed by checking for clumps, since static can leave fine dust behind.

Who Is This Grinder For?

Who is the coffee grinder single-dosing grinder for? It suits people who brew one cup at a time, then weigh and load fresh grounds, because it is designed for single dosing with true zero retention (less than 0.1g) and a stepless adjustable dial for precise settings. The MiiCoffee is also suitable for espresso, since it can be dialled in for espresso with high precision, and its 64mm stainless-steel flat burrs are upgradable. It is a practical choice for home baristas who want to control grind consistency. Those wanting unattended grinding may find it less convenient.

Where to Buy in the UK

For UK buyers, the coffee grinder single-dosing grinder is typically sourced through online retailers and coffee-equipment shops that stock This coffee grinder models, so availability can vary by postcode and delivery options. It also helps to search marketplaces for listings that include "miicoffee" or "DF64 II". For shoppers comparing the miicoffee df64 ii single dosing coffee grinder best price uk, it is practical to weigh the total cost of the unit plus delivery and any bundled extras. Many buyers prefer ordering from specialist stores, as these outlets can confirm version details such as the New Version 2.4 inner chute design. Stock can sell out quickly, particularly around major holidays.